actions
Introduction to actions
actions is not a top-level configuration block, but can be used as part of
multiple other blocks.
Actions are pre-configured activities that can be triggered in response to a variety of circumstances (e.g. tapping on a menu icon, double tapping on an element or holding the mouse/tap down on a particular view).
Differences in actions between Frigate Card and Home Assistant
Both the Home Assistant frontend and the Frigate card cooperate to provide action functionality. In general, the Frigate Card functionality is a superset of that offered by stock Home Assistant.
Stock action functionality is used for Stock Home Assistant picture elements. Extended Frigate card behavior covers all other interactions on the Frigate card (e.g. menu icon elements, submenus and actions on the card or views).
Custom action types: start_tap and end_tap
The card has partial support for two special action types start_tap and
end_tap which occur when a tap is started (e.g. mouse is pressed down /
touch begins), and ended (e.g. mouse released / touch ends) respectively. This
might be useful for PTZ cameras cameras to start/stop movement on touch. Network
latency may introduce unavoidable imprecision between end_tap and action
actually occurring.
Multiple actions
Extended Frigate card behavior supports a list of actions instead of a single action, all of which will be handled. See an example of multiple actions.
Card and view actions
Actions may be attached to the card itself, to trigger action when the card
experiences a tap, double_tap, hold, start_tap or end_tap event.
Alternatively they can be configured on a per group-of-views basis, e.g. only
when live view is tapped.
| Configuration path | Views to which it refers |
|---|---|
image.actions |
image |
live.actions |
live |
media_gallery.actions |
clips, snapshots, recordings |
media_viewer.actions |
clip, snapshot, recording |
view.actions |
All except timeline and diagnostic |
If an action is configured for both the whole card (view.actions) and a more
specific view (e.g. live.actions) then the actions are merged, with the more
specific overriding the less specific.
!> The card itself relies on user interactions to function (e.g. tap on
the menu should activate that button). Card or View actions are prevented from
being activated through standard interaction with menu buttons, next/previous
controls, thumbnails, etc, but in some cases this prevention is not possible
(e.g. embedded WebRTC card controls) -- in these cases duplicate actions may
occur with certain configurations (e.g. tap).
!> Card-wide actions are not supported on the timeline view, diagnostics
view nor when a info/error message is being displayed.
Actions
| Option | Description |
|---|---|
| Custom Actions | Custom actions to control the card. |
| Stock Actions | Standard Home Assistant actions. |