Review queries were issued without a severity filter, so the thumbnail
bar, gallery and timeline showed every Frigate review item -- alerts and
detections alike -- regardless of what a camera is configured to alert
on. Severity could only be narrowed interactively, in the media filter
drawer, and that choice did not persist.
`media.severities` resolves into the default query the same way
`media.reviewed` does, and is overridden by an explicit severity filter
so the media filter drawer keeps working. Unset means all severities, so
existing behaviour is unchanged.
cameras:
- camera_entity: camera.office
media:
severities:
- high
The card claimed a camera's ONVIF audio backchannel in two places that
had
nothing to do with a call: the capability probe at camera init
(`µphone`),
and a pre-armed `sendonly` audio transceiver on every live WebRTC offer.
Merely
looking at a dashboard occupied the camera's speaker line. Outbound
audio now
travels on its own audio-only WebRTC connection, opened when a call is
answered
and closed when it ends.
- The backchannel is claimed only for the duration of a call. Idle
viewing
claims nothing.
- Two-way audio now works in `mse`, `mp4` and `mjpeg` modes (note: the
outbound
audio still traverses WebRTC).
- No renegotiation and no video blink at call start or end.
- A call that cannot carry audio now reports it and ends, instead of
showing a
live microphone that goes nowhere.
- `live.microphone.always_connected` is now purely about the browser
microphone
permission prompt.
- Call setup measured at 66ms (LAN) and ~260ms (cellular) for ICE and
DTLS, plus
~300ms for `go2rtc` to open an RTSP backchannel.
Verified against a live Frigate + `go2rtc` instance, and by unit tests
at 100%
coverage.
- Closes#2691
- Closes#2039
- Closes#2178
Ref #2299 -- the probe no longer opens a backchannel, but it still runs
per
camera on every load and reconnect, and still dials the camera on the
direct-`go2rtc` path. Caching remains to be done.
Ref AlexxIT/go2rtc#1860 -- once a call has opened a backchannel,
`go2rtc` keeps
that media set up on the camera's RTSP session for the life of the
producer.
Diagnoses #2678
- Closes#2556
- Closes#2450
**Key intended features:**
- go2rtc compatible
- 100% test coverage to significantly improve ability to test, maintain
and work around browser weirdnesses (e.g. Safari).
- Written from the ground up in the style of the rest of the project.
**To use:**
- Change `live_provider` from `go2rtc` to `go2rtc-experimental`.
Split automations into HA-style `triggers`, ongoing `conditions`, and
`actions`, with compatibility migrations for existing Advanced Camera
Card configs.
## Summary
At a glance (details below):
- **Added** `triggers:` -- a required, HA-shaped block: stock `state` /
`numeric_state` / `template` plus card-specific triggers (`camera`,
`view`, `fullscreen`, ...).
- **Added** the HA-native `if` / `then` / `else` action.
- **Removed** `actions_not` (replaced by `if` / `then` / `else`).
- **Removed** the ambient `advanced_camera_card` template namespace (use
`acc` instead).
- **Changed** the trigger template surface to a top-level `trigger.*`
variable (as in HA); the nested `acc.trigger.*` paths are removed.
- **Changed** `conditions:` to ongoing gates only -- they no longer wake
an automation, and change-only forms (`config`, valueless `camera` /
`view` / `state`) become triggers, not conditions.
- **Changed** action templates to render per step, so a later action
sees state an earlier one changed.
- **Compatibility:** HA-shaped YAML is accepted (singular keys,
single-or-list, `and` / `or` / `not` shorthand, `entity` / `entity_id`).
- **Migration:** existing configs upgrade automatically; anything that
cannot be converted faithfully is recorded under `__UPGRADE_FAILURE__`
for manual fixup.
## Breaking Changes
### 1. Automations now require triggers
Before this PR, `automations[].conditions` served two roles:
- They decided whether the automation should run.
- They also acted as the thing that woke the automation up.
After this PR:
- `triggers` wake the automation.
- `conditions` only gate it at the instant a trigger fires.
Most existing automations are migrated automatically from `conditions:`
to `triggers:`.
### 2. `actions_not` is retired
Legacy `actions_not` is replaced by an HA-style `if` action with `then`
/ `else`.
Faithful conversions are automatic. Cases that cannot be faithfully
converted are recorded under `__UPGRADE_FAILURE__.automations` and must
be migrated manually.
### 3. Template surface aligned with Home Assistant
Two related template changes, both auto-migrated:
- **Top-level `trigger.*`.** Automation actions now receive a top-level
`trigger` template variable, like Home Assistant. Legacy nested paths
such as `acc.trigger.state.to` and
`advanced_camera_card.trigger.camera.to` are migrated automatically when
they appear inside template strings.
- **The ambient `advanced_camera_card` template namespace is removed.**
The long-form ambient namespace (`advanced_camera_card.camera`,
`advanced_camera_card.view`, `advanced_camera_card.config`) is retired
in favour of its shorter `acc` alias -- supported since v7.1.0, and the
only spelling the new trigger surface uses. Existing templates are
migrated automatically by rewriting the `advanced_camera_card.` prefix
to `acc.`.
### 4. Trigger-only condition forms are no longer valid conditions
Some legacy "conditions" were really change detectors. These are now
triggers only:
- `condition: config`
- valueless `camera`
- valueless `view`
- valueless `state` / picture-elements state condition with neither
`state` nor `state_not`
These are automatically promoted in automations and stripped from
overrides/elements where they would no longer be meaningful as ongoing
conditions.
### 5. Template truthiness now follows Home Assistant behavior
Template conditions and template triggers intentionally use different
truthiness rules, matching HA:
- A template condition passes only when the rendered value is `true`
(case-insensitive), matching HA's `condition.py`.
- A template trigger uses HA's broader `result_as_boolean` coercion: a
non-zero number, or `1` / `true` / `yes` / `on` / `enable`
(case-insensitive), counts as true.
### 6. Action templates render when each action executes
Action templates are now rendered per action step, not once for the
whole sequence. This means a later action can see card-local state
changed by an earlier action in the same sequence.
The `trigger` context is fixed for the automation run. HA entity state
updates still depend on the frontend receiving updated HASS state over
the websocket.
## Automatic Migrations
### Automation `conditions:` to `triggers:`
Simple legacy automation:
```yaml
# Before
automations:
- conditions:
- condition: fullscreen
fullscreen: true
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: substream_on
```
```yaml
# After, automatic
automations:
- triggers:
- trigger: fullscreen
fullscreen: true
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: substream_on
```
State conditions become HA-style state triggers:
```yaml
# Before
automations:
- conditions:
- condition: state
entity_id: binary_sensor.front_door
state: 'on'
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: live
```
```yaml
# After, automatic
automations:
- triggers:
- trigger: state
entity_id: binary_sensor.front_door
to: 'on'
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: live
```
Multiple conditions become both triggers and ongoing conditions:
```yaml
# Before
automations:
- conditions:
- condition: camera
cameras: [front_door]
- condition: fullscreen
fullscreen: true
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: substream_on
```
```yaml
# After, automatic
automations:
- triggers:
- trigger: camera
cameras: [front_door]
- trigger: fullscreen
fullscreen: true
conditions:
- condition: camera
cameras: [front_door]
- condition: fullscreen
fullscreen: true
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: substream_on
```
The flattened trigger list is an implicit OR. The retained `conditions:`
list is an implicit AND checked when any trigger fires.
### Trigger-only legacy conditions
Legacy `config` conditions become `config` triggers:
```yaml
# Before
automations:
- conditions:
- condition: config
paths: [menu.style]
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: status_bar
```
```yaml
# After, automatic
automations:
- triggers:
- trigger: config
paths: [menu.style]
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: status_bar
```
Trigger-only leaves are removed from retained `conditions:` blocks
because they no longer describe an ongoing state.
### `actions_not` to `if` / `then` / `else`
```yaml
# Before
automations:
- conditions:
- condition: state
entity_id: input_boolean.camera_alerts
state: 'on'
actions:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: live
actions_not:
- action: none
```
```yaml
# After, automatic
automations:
- triggers:
- trigger: state
entity_id: input_boolean.camera_alerts
actions:
- if:
- condition: state
entity_id: input_boolean.camera_alerts
state: 'on'
then:
- action: custom:advanced-camera-card-action
advanced_camera_card_action: live
else:
- action: none
```
If the legacy automation had no conditions, or only trigger-only
conditions, `actions_not` is dropped because the old `else` branch could
not be reproduced as an ongoing predicate.
### Trigger template paths
```yaml
# Before
message: 'Door is {{ acc.trigger.state.to }} from {{ acc.trigger.state.from }}'
```
```yaml
# After, automatic
message: 'Door is {{ trigger.to_state.state }} from {{ trigger.from_state.state }}'
```
Path rewrites performed automatically:
| Old path | New path |
| -------------------------- | -------------------------- |
| `acc.trigger.state.entity` | `trigger.entity_id` |
| `acc.trigger.state.from` | `trigger.from_state.state` |
| `acc.trigger.state.to` | `trigger.to_state.state` |
| `acc.trigger.camera.from` | `trigger.from_acc.camera` |
| `acc.trigger.camera.to` | `trigger.to_acc.camera` |
| `acc.trigger.view.from` | `trigger.from_acc.view` |
| `acc.trigger.view.to` | `trigger.to_acc.view` |
| `acc.trigger.config.from` | `trigger.from_acc.config` |
| `acc.trigger.config.to` | `trigger.to_acc.config` |
The same rewrites are applied for the older
`advanced_camera_card.trigger.*` namespace.
### Ambient template namespace
Any remaining long-form ambient `advanced_camera_card.*` references
(outside the trigger surface) are rewritten to the `acc.*` alias:
```yaml
# Before
title: 'Now viewing {{ advanced_camera_card.camera }}'
```
```yaml
# After, automatic
title: 'Now viewing {{ acc.camera }}'
```
## Manual Migration Cases
### `__UPGRADE_FAILURE__.automations`
If a legacy automation cannot be converted faithfully, the original
automation is recorded under:
```yaml
__UPGRADE_FAILURE__:
automations:
- ...
```
These entries require manual migration.
The main known case is legacy `actions_not` with a condition whose
trigger can only fire on a rising edge, such as:
- `condition: template`
- `condition: screen`
- `condition: numeric_state` without an entity-backed state to watch
Those conditions can start the `then` branch, but cannot reliably start
the `else` branch when they stop matching.
### Unsupported HA conditions and triggers
This PR aligns the card with HA where supported, but it is not a full HA
automation engine.
Unsupported HA condition families include:
- `time`
- `zone`
- `sun`
- `location`
- `device`
- `condition: trigger`
Unsupported HA trigger platforms include:
- `event`
- `time`
- `time_pattern`
- `sun`
- `zone`
- `calendar`
- `webhook`
- `tag`
- `device`
- `mqtt`
The card-specific camera `triggers:` feature (which auto-selects and
wakes the card on camera events such as motion) is a separate feature
from automation `triggers:`, despite the shared word.
### Trigger IDs and variables
HA keys such as `id`, `alias`, and `variables` are accepted so pasted HA
YAML validates, but they are ignored by the card. There is no
`trigger.id` support in this PR.
## New Compatibility Features
This PR also makes card config more forgiving for HA-style YAML:
- `trigger`, `condition`, and `action` singular keys are accepted and
normalized to `triggers`, `conditions`, and `actions`.
- Single trigger, condition, and action objects are accepted where lists
are expected.
- `if`, `then`, and `else` accept a single item or a list.
- Composite condition shorthand is accepted:
- `{ and: [...] }`
- `{ or: [...] }`
- `{ not: [...] }`
- `{ condition: [...] }` as an implicit AND
- State conditions resolve expected state values that name another
entity, matching HA/Lovelace behavior.
- Both `entity` and `entity_id` are accepted on state and numeric
conditions and triggers (a superset of HA's two dialects), so there is
no forced rename.
- `state_not` remains supported as a card/Lovelace-friendly extension.
## Trigger Payloads
Automation action templates receive a top-level `trigger` object.
For stock `state` and `numeric_state` triggers:
```yaml
trigger.platform
trigger.entity_id
trigger.entity
trigger.from_state
trigger.to_state
```
For template triggers:
```yaml
trigger.platform
```
For card-specific triggers:
```yaml
trigger.platform # "acc"
trigger.type
trigger.from_acc
trigger.to_acc
```
The card does not currently expose HA's `id`, `idx`, `for`, `attribute`,
`above`, `below`, or `alias` trigger fields.
BREAKING CHANGE: Automations now follow Home Assistant's `triggers:` /
`conditions:` / `actions:` model. Automations require a `triggers:`
block and `conditions:` no longer wake an automation; `actions_not` is
removed in favour of an `if` / `then` / `else` action; the nested
`acc.trigger.*` template paths and the ambient `advanced_camera_card`
template namespace are removed (use the top-level `trigger.*` surface
and the `acc` alias); trigger-only condition forms (`config`, valueless
`camera` / `view` / `state`) are no longer valid conditions; and
template-condition vs template-trigger truthiness now follow HA.
Existing configs are upgraded automatically where a faithful conversion
exists; anything that cannot be converted is recorded under
`__UPGRADE_FAILURE__` for manual migration.
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
BREAKING CHANGE: The `screensaver` image mode now shows a random image
from [picsum.photos](picsum.photos) instead of the embedded default
image. If you previously set `image.mode: screensaver`, change it to
`image.mode: default` to restore the previous behavior.
- Add support for Frigate reviews / detections.
- Add support for GenAI metadata.
- Significant internal refactor to more flexible "UnifiedQuery" to allow
mixing cameras with simple metadata and review metadata (e.g. a timeline
view of a Frigate camera with reviews, and a Reolink camera with simple
metadata).
- Add support for folder media as camera media.
There are a few more PRs to commit prior to this going live, but
commiting this for now due to the scale of the change.
BREAKING CHANGE: `media_type` and `events_type` are retired under
`live`, `viewer` and `timeline` configuration sections, instead media
type is associated (once) with the camera under `media`.
- For Frigate cameras, you must be running at least [integration
v5.12.0](https://github.com/blakeblackshear/frigate-hass-integration/releases/tag/v5.12.0).
- Closes: #2191
Includes a significant refactor of cameras, and the introduction of a
`2-way-audio` capability that is dynamically fetched from `go2rtc`. One
gotcha is if you previously had a substream with 2-way audio, you may
need to modify
```yaml
- camera_entity: camera.foo
capabilities:
disable_except:
- substream
```
... to ...
```yaml
- camera_entity: camera.foo
capabilities:
disable_except:
- substream
- 2-way-audio
```
- Closes: #2032, #1899
- May or may not help with #2254
- Caution: I do not have an NVR-based Reolink camera to test. If
suddenly Reolink cameras don't work in the card, or in particular if
media doesn't correctly load, this is likely the culprit PR.
Whilst the Frigate support in this card is the best among camera
engines, the name incorrectly suggests that Frigate is a requirement.
Instead, to broaden the appeal, change to more camera agnostic name.
This does not suggest any change in priority, role or support for
Frigate.
This change is likely to be bug prone, due to the size of the rename --
the code contains 1500+ references to "Frigate" most of which make sense
to rename, some which do not, all of which needed human assessment.
- Closes#1298
BREAKING CHANGE: References to `frigate-card` in all kinds of
configuration need to be updated to `advanced-camera-card`. An automated
config upgrade should take care of the majority of usecases (click `Edit
-> Upgrade -> Save`), though may not be perfect.
flan