Rename frigate-jsmpeg to jsmpeg.

.devcontainer/preconfig/.storage/lovelace

@@ -18,7 +18,7 @@
               "cameras": [
                 {
                   "camera_entity": "camera.big_buck_bunny",
-                  "live_provider": "frigate-jsmpeg",
+                  "live_provider": "jsmpeg",
                   "id": "big_buck_bunny_jsmpeg"
                 },
                 {

README.md

@@ -120,7 +120,7 @@ See the [fully expanded cameras configuration example](#config-expanded-cameras)
 |`ha` (when configured with LL-HLS)|Better|High|Better|Builtin|Use the built-in Home Assistant camera streams -- can be configured to use an [LL-HLS](https://www.home-assistant.io/integrations/stream/#ll-hls) feed for lower latency.|
 |`ha` (Native WebRTC)|Best|High|Better|Builtin|Use the built-in Home Assistant camera streams -- can be configured to use [native WebRTC](https://www.home-assistant.io/integrations/rtsp_to_webrtc/) offering a very low-latency feed direct to your browser.|
 |`image`|Poor|Poor|Best|Builtin|Use refreshing snapshots of the built-in Home Assistant camera streams.|
-|`frigate-jsmpeg`|Better|Low|Poor|Builtin|Stream the JSMPEG stream from Frigate (proxied via the Frigate integration). See [note below on the required integration version](#jsmpeg-troubleshooting) for this live provider to function. This is the only live provider that can view the Frigate `birdseye` view.|
+|`jsmpeg`|Better|Low|Poor|Builtin|Use a the JSMPEG stream.|
 |`go2rtc`|Best|High|Better|Builtin|Uses [go2rtc](https://github.com/AlexxIT/go2rtc) to stream live feeds. This is supported by Frigate >= `0.12`.|
 |`webrtc-card`|Best|High|Better|Separate installation required|Embed's [AlexxIT's WebRTC Card](https://github.com/AlexxIT/WebRTC) to stream live feed, requires manual extra setup, see [below](#webrtc). Not to be confused with native Home Assistant WebRTC (use `ha` provider above).|
 
@@ -128,11 +128,20 @@ See the [fully expanded cameras configuration example](#config-expanded-cameras)
 
 #### Available Camera Engines
 
+##### Engine Capabilities
+
 |Engine|Live|Supports clips|Supports Snapshots|Supports Recordings|Supports Timeline|Favorite events|Favorite recordings|
 | - | - | - | - | - | - | - | - |
 |`frigate`| :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :heavy_multiplication_x: |
 |`generic`| :white_check_mark: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: |
 
+##### Live providers supported per Engine
+
+|Engine / Live Provider|`ha`|`image`|`jsmpeg`|`go2rtc`|`webrtc-card`|
+| - | - | - | - | - | - |
+|`frigate`| :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: |
+|`generic`| :white_check_mark: | :white_check_mark: | :heavy_multiplication_x: | :heavy_multiplication_x: | :white_check_mark: |
+
 <a name="camera-frigate-configuration"></a>
 
 #### Camera Frigate configuration
@@ -146,7 +155,7 @@ cameras:
 
 | Option | Default | Overridable | Description |
 | - | - | - | - |
-| `camera_name` | Autodetected from `camera_entity` if that is specified. | :heavy_multiplication_x: | The Frigate camera name to use when communicating with the Frigate server, e.g. for viewing clips/snapshots or the JSMPEG live view. To view the birdseye view set this to `birdseye` and use the `frigate-jsmpeg` live provider.|
+| `camera_name` | Autodetected from `camera_entity` if that is specified. | :heavy_multiplication_x: | The Frigate camera name to use when communicating with the Frigate server, e.g. for viewing clips/snapshots or the JSMPEG live view.|
 | `url` | | :heavy_multiplication_x: | The URL of the frigate server. If set, this value will be (exclusively) used for a `Frigate UI` menu button. All other communication with Frigate goes via Home Assistant. |
 | `label` | | :heavy_multiplication_x: | A Frigate label / object filter used to filter events (clips & snapshots), e.g. `person`.|
 | `zone` | | :heavy_multiplication_x: | A Frigate zone used to filter events (clips & snapshots), e.g. `front_door`.|
@@ -352,7 +361,7 @@ See the [fully expanded live configuration example](#config-expanded-live) for h
 | `show_image_during_load` | `true` | :white_check_mark: | If `true`, during the initial stream load, the `image` live provider will be shown instead of the loading video stream. This still image will auto-refresh and is replaced with the live stream once loaded. |
 | `actions` | | :white_check_mark: | Actions to use for the `live` view. See [actions](#actions) below.|
 | `controls` | | :white_check_mark: | Configuration for the `live` view controls. See below. |
-| `jsmpeg` | | :white_check_mark: | Configuration for the `frigate-jsmpeg` live provider. See below.|
+| `jsmpeg` | | :white_check_mark: | Configuration for the `jsmpeg` live provider. See below.|
 | `webrtc_card` | | :white_check_mark: | Configuration for the `webrtc-card` live provider. See below.|
 | `layout` | | :white_check_mark: | See [media layout](#media-layout) below.|
 
@@ -2298,7 +2307,7 @@ to provide a separate unambiguous way of referring to that camera, since the
 type: custom:frigate-card
 cameras:
   - camera_entity: camera.front_door
-    live_provider: frigate-jsmpeg
+    live_provider: jsmpeg
     title: Front Door (JSMPEG)
   - camera_entity: camera.front_door
     live_provider: webrtc-card
@@ -3166,7 +3175,7 @@ Using a `panel` dashboard with the following base configuration will result in t
 type: custom:frigate-card
 cameras:
   - camera_entity: camera.front_door
-    live_provider: frigate-jsmpeg
+    live_provider: jsmpeg
 dimensions:
   aspect_ratio: 1024:600
   aspect_ratio_mode: static
@@ -3208,12 +3217,6 @@ For some slowly loading cameras, for which [Home Assistant stream preloading](ht
 
 <a name="jsmpeg-troubleshooting"></a>
 
-### JSMPEG Live Camera Only Shows A 'spinner'
-
-You must be using a version of the [Frigate integration](https://github.com/blakeblackshear/frigate-hass-integration) >= 2.1.0
-to use JSMPEG proxying. The `frigate-jsmpeg` live provider will not work with earlier
-integration versions.
-
 ### Timeline shows error message
 
 If the timeline shows a message such as `Failed to receive response from Home
@@ -3255,7 +3258,7 @@ possible in carousels that use the Firefox video player (e.g. `clips` carousel,
 or live views that use the `frigate` or `webrtc-card` provider). The next and
 previous buttons may be used to navigate in these instances.
 
-Dragging works as expected for snapshots, or for the `frigate-jsmpeg` provider.
+Dragging works as expected for snapshots, or for the `jsmpeg` provider.
 
 ### Progress bar cannot be dragged in Safari
 

src/components/live/live.ts

@@ -747,7 +747,7 @@ export class FrigateCardLiveProvider extends LitElement {
           return 'ha';
         }
       } else if (this.cameraConfig?.frigate.camera_name) {
-        return 'frigate-jsmpeg';
+        return 'jsmpeg';
       }
       return frigateCardConfigDefaults.cameras.live_provider;
     }
@@ -799,7 +799,7 @@ export class FrigateCardLiveProvider extends LitElement {
     }
     if (changedProps.has('cameraConfig')) {
       const provider = this._getResolvedProvider();
-      if (provider === 'frigate-jsmpeg') {
+      if (provider === 'jsmpeg') {
         import('./live-jsmpeg.js');
       } else if (provider === 'ha') {
         import('./live-ha.js');
@@ -881,7 +881,7 @@ export class FrigateCardLiveProvider extends LitElement {
             @frigate-card:media:loaded=${this._videoMediaShowHandler.bind(this)}
           >
           </frigate-card-live-webrtc-card>`
-        : provider === 'frigate-jsmpeg'
+        : provider === 'jsmpeg'
         ? html` <frigate-card-live-jsmpeg
             ${ref(this._providerRef)}
             class=${classMap(providerClasses)}

src/config-mgmt.ts

@@ -735,4 +735,10 @@ const UPGRADES = [
       typeof data === 'object' && data ? <RawFrigateCardConfig>data : {},
     );
   },
+  upgradeArrayValue(
+    CONF_CAMERAS,
+    upgradeWithOverrides('live_provider', (val) =>
+      val === 'frigate-jsmpeg' ? 'jsmpeg' : val,
+    ),
+  ),
 ];

src/editor.ts

@@ -1197,8 +1197,8 @@ export class FrigateCardEditor extends LitElement implements LovelaceCardEditor
         label: localize('config.cameras.live_providers.image'),
       },
       {
-        value: 'frigate-jsmpeg',
+        value: 'jsmpeg',
-        label: localize('config.cameras.live_providers.frigate-jsmpeg'),
+        label: localize('config.cameras.live_providers.jsmpeg'),
       },
       {
         value: 'go2rtc',

src/localize/languages/en.json

@@ -38,7 +38,7 @@
       "live_provider": "Live view provider for this camera",
       "live_providers": {
         "auto": "Automatic",
-        "frigate-jsmpeg": "Frigate JSMpeg",
+        "jsmpeg": "JSMpeg",
         "go2rtc": "go2rtc",
         "ha": "Home Assistant video stream (i.e. HLS, LL-HLS, WebRTC via HA)",
         "image": "Home Assistant images",

src/localize/languages/it.json

@@ -28,7 +28,7 @@
       "live_provider": "Provider di visualizzazione dal vivo per questa telecamera",
       "live_providers": {
         "auto": "Automatica",
-        "frigate-jsmpeg": "Frigate JSMpeg",
+        "jsmpeg": "JSMpeg",
         "go2rtc": "",
         "ha": "",
         "image": "",

src/localize/languages/pt-BR.json

@@ -28,7 +28,7 @@
       "live_provider": "Provedor de visualização ao vivo para esta câmera",
       "live_providers": {
         "auto": "Automatico",
-        "frigate-jsmpeg": "Frigate JSMpeg",
+        "jsmpeg": "JSMpeg",
         "go2rtc": "",
         "ha": "",
         "image": "",

src/types.ts

@@ -70,7 +70,7 @@ const LIVE_PROVIDERS = [
   'auto',
   'image',
   'ha',
-  'frigate-jsmpeg',
+  'jsmpeg',
   'go2rtc',
   'webrtc-card',
 ] as const;