Rename frigate-jsmpeg to jsmpeg.

README.md

@@ -120,7 +120,7 @@ See the [fully expanded cameras configuration example](#config-expanded-cameras)
 |`ha` (when configured with LL-HLS)|Better|High|Better|Builtin|Use the built-in Home Assistant camera streams -- can be configured to use an [LL-HLS](https://www.home-assistant.io/integrations/stream/#ll-hls) feed for lower latency.|
 |`ha` (Native WebRTC)|Best|High|Better|Builtin|Use the built-in Home Assistant camera streams -- can be configured to use [native WebRTC](https://www.home-assistant.io/integrations/rtsp_to_webrtc/) offering a very low-latency feed direct to your browser.|
 |`image`|Poor|Poor|Best|Builtin|Use refreshing snapshots of the built-in Home Assistant camera streams.|
-|`frigate-jsmpeg`|Better|Low|Poor|Builtin|Stream the JSMPEG stream from Frigate (proxied via the Frigate integration). See [note below on the required integration version](#jsmpeg-troubleshooting) for this live provider to function. This is the only live provider that can view the Frigate `birdseye` view.|
+|`jsmpeg`|Better|Low|Poor|Builtin|Use a the JSMPEG stream.|
 |`go2rtc`|Best|High|Better|Builtin|Uses [go2rtc](https://github.com/AlexxIT/go2rtc) to stream live feeds. This is supported by Frigate >= `0.12`.|
 |`webrtc-card`|Best|High|Better|Separate installation required|Embed's [AlexxIT's WebRTC Card](https://github.com/AlexxIT/WebRTC) to stream live feed, requires manual extra setup, see [below](#webrtc). Not to be confused with native Home Assistant WebRTC (use `ha` provider above).|
 
@@ -128,11 +128,20 @@ See the [fully expanded cameras configuration example](#config-expanded-cameras)
 
 #### Available Camera Engines
 
+##### Engine Capabilities
+
 |Engine|Live|Supports clips|Supports Snapshots|Supports Recordings|Supports Timeline|Favorite events|Favorite recordings|
 | - | - | - | - | - | - | - | - |
 |`frigate`| :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :heavy_multiplication_x: |
 |`generic`| :white_check_mark: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: | :heavy_multiplication_x: |
 
+##### Live providers supported per Engine
+
+|Engine / Live Provider|`ha`|`image`|`jsmpeg`|`go2rtc`|`webrtc-card`|
+| - | - | - | - | - | - |
+|`frigate`| :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: | :white_check_mark: |
+|`generic`| :white_check_mark: | :white_check_mark: | :heavy_multiplication_x: | :heavy_multiplication_x: | :white_check_mark: |
+
 <a name="camera-frigate-configuration"></a>
 
 #### Camera Frigate configuration
@@ -146,7 +155,7 @@ cameras:
 
 | Option | Default | Overridable | Description |
 | - | - | - | - |
-| `camera_name` | Autodetected from `camera_entity` if that is specified. | :heavy_multiplication_x: | The Frigate camera name to use when communicating with the Frigate server, e.g. for viewing clips/snapshots or the JSMPEG live view. To view the birdseye view set this to `birdseye` and use the `frigate-jsmpeg` live provider.|
+| `camera_name` | Autodetected from `camera_entity` if that is specified. | :heavy_multiplication_x: | The Frigate camera name to use when communicating with the Frigate server, e.g. for viewing clips/snapshots or the JSMPEG live view.|
 | `url` | | :heavy_multiplication_x: | The URL of the frigate server. If set, this value will be (exclusively) used for a `Frigate UI` menu button. All other communication with Frigate goes via Home Assistant. |
 | `label` | | :heavy_multiplication_x: | A Frigate label / object filter used to filter events (clips & snapshots), e.g. `person`.|
 | `zone` | | :heavy_multiplication_x: | A Frigate zone used to filter events (clips & snapshots), e.g. `front_door`.|
@@ -352,7 +361,7 @@ See the [fully expanded live configuration example](#config-expanded-live) for h
 | `show_image_during_load` | `true` | :white_check_mark: | If `true`, during the initial stream load, the `image` live provider will be shown instead of the loading video stream. This still image will auto-refresh and is replaced with the live stream once loaded. |
 | `actions` | | :white_check_mark: | Actions to use for the `live` view. See [actions](#actions) below.|
 | `controls` | | :white_check_mark: | Configuration for the `live` view controls. See below. |
-| `jsmpeg` | | :white_check_mark: | Configuration for the `frigate-jsmpeg` live provider. See below.|
+| `jsmpeg` | | :white_check_mark: | Configuration for the `jsmpeg` live provider. See below.|
 | `webrtc_card` | | :white_check_mark: | Configuration for the `webrtc-card` live provider. See below.|
 | `layout` | | :white_check_mark: | See [media layout](#media-layout) below.|
 
@@ -2298,7 +2307,7 @@ to provide a separate unambiguous way of referring to that camera, since the
 type: custom:frigate-card
 cameras:
   - camera_entity: camera.front_door
-    live_provider: frigate-jsmpeg
+    live_provider: jsmpeg
     title: Front Door (JSMPEG)
   - camera_entity: camera.front_door
     live_provider: webrtc-card
@@ -3166,7 +3175,7 @@ Using a `panel` dashboard with the following base configuration will result in t
 type: custom:frigate-card
 cameras:
   - camera_entity: camera.front_door
-    live_provider: frigate-jsmpeg
+    live_provider: jsmpeg
 dimensions:
   aspect_ratio: 1024:600
   aspect_ratio_mode: static
@@ -3208,12 +3217,6 @@ For some slowly loading cameras, for which [Home Assistant stream preloading](ht
 
 <a name="jsmpeg-troubleshooting"></a>
 
-### JSMPEG Live Camera Only Shows A 'spinner'
-
-You must be using a version of the [Frigate integration](https://github.com/blakeblackshear/frigate-hass-integration) >= 2.1.0
-to use JSMPEG proxying. The `frigate-jsmpeg` live provider will not work with earlier
-integration versions.
-
 ### Timeline shows error message
 
 If the timeline shows a message such as `Failed to receive response from Home
@@ -3255,7 +3258,7 @@ possible in carousels that use the Firefox video player (e.g. `clips` carousel,
 or live views that use the `frigate` or `webrtc-card` provider). The next and
 previous buttons may be used to navigate in these instances.
 
-Dragging works as expected for snapshots, or for the `frigate-jsmpeg` provider.
+Dragging works as expected for snapshots, or for the `jsmpeg` provider.
 
 ### Progress bar cannot be dragged in Safari